Manganese Steel
In a blast machine the entire cabinet and any components such as work fixtures and parts of work conveying systems must be made of manganese steel.
Note: 11% to 14% Mn manganese steel it is the Hatfield Steel.
We can source for you:
- Plates 1/4" to 2" thick, up to 7 FT wide and up to 20 FT long
- Flats 1/4" to 1" thick, 3/4" to 6" wide and up to 20 FT long
- Rounds 5/16" to 6" Dia, up to 20 FT long
- Squares 1/4" to 2", up to 20 FT long
Also avilable:
- WEAR LINERS-HORIZONTAL/VERTICAL
- WEAR PLATE CASTINGS
- SCREENS
The characteristics of 11% to 14% Mn Hadfield Steel
- Work hardening steel - the more impact and abrasion it gets the harder the surface becomes.
- Steel stays ductile underneath - as the surface wears - only outer layer gets hard.
- With continued impact the manganese steel can harden to 63 Rockwell C scale or 668 Brinell.
- When rolled - never brittle.
- Work hardened surface is almost friction-less.
- Non-Magnetic
- Quenched, annealed and austenitic
- Can be cut by plasma / laser / water jet / oxy-acetylene
- Made to ASTM A128 standards
- Tensile strength - 120,000/130,000 psi
- Yield strength - 60,000/85,000 psi
- % Elongation in 2" - 35%/50%
Chemical composition
- Mn 11.0/14.0
- C 1.0/1.3
- Si 0.60 max
- P 0.05 max
- S 0.04 max
To inquire about pricing, delivery or any other questions send e-mail to: info@blastcleaningmachines.com
|
|
|
|